The threaded connector is a threaded connection structure of an electrical connector consisting of a housing, a nut and a tailge, with a gap between the screw and the tail hood, which is divided around the axis Two parts. Widely used in aviation, radar, microwave communications, digital communications.Screw Connector
A threaded connection structure of an electrical connector consisting of a housing, a nut and a tailge, and a gap between the screw and the tail, which is divided into left and right parts along the axis. The inner surface of the shell is provided with an internal thread connected with the screw sleeve, the outer surface of the screw sleeve is provided with an external thread, and the inner surface of the inner surface of the inner shell Which is provided with an inner annular groove connected with the tail cover which ensures the connection between the shell and the tail cover, and achieves the relative rotation between the shell and the tail cover, Of the alignment.
SMA is widely used in aviation, radar, microwave communications, digital communications and other military people its impedance of 50Ω, with a soft cable frequency of less than 12.4GHz, semi-rigid cable up to 26.5GHz. Used in the detection, inflation, sealing, calibration or venting, and so on the connection part. With your fingers tightly put the MIT connector into the thread test piece until the sealing surface contact thread electrical connector is widely used in electronics, instrumentation, video processing, medical equipment and so on.Screw Connector
The product is characterized by: connection of reliable thread connection miniaturization - compact structure CNT14CNT14-01PT04SHKGD series master code Shell No. 01,02,03 PT, threaded connection, the structure has a small size, light weight, high contact density, high reliability Advantages. Contact with the wire connection for the crimp termination, contact even can be a single type of out or into the.Screw Connector
On both ends of a reinforcing bar, the outer conical thread connecting sleeve and the inner taper thread connecting sleeve are respectively set. The SMC connector is a threaded variant of the SMB connector and is a typical reverse polarity connector: the inner conductor in the connecting sleeve is the jack. Internal dimensions in the same SMB, with small size, high reliability.Screw Connector