You Don't Know Spring Pin Connector

- Sep 26, 2017-

     The contact piece (contacts) is the core part of the connector that completes the electrical connection function. The contact pairs are generally composed of positive contact parts and negative contact parts, and the electrical connection is completed through the insertion of the yin and yang contact parts. Spring Pin Connector

    The flange is also often referred to as the base (base) or mounting plate (insert), which is used to align the contact parts to the desired position and spacing, and to ensure the performance between the contact and the contact piece and the enclosure. Good margin resistance, voltage resistance and easy processing are the basic requirements for the selection of flange materials.Spring Pin Connector

    The shell, also known as the shell (shell), is the housing of the connector, which provides mechanical protection for the internal mounting plate and pins, and provides the alignment of the plugs and sockets, and then the connectors are fastened to the device. Annexes and installation annexes. Structural accessories such as card ring, positioning key, positioning pin, guide pin, connection ring, cable clamp, sealing ring, gasket, etc. Installation accessories such as screws, nuts, screws, spring rings, etc. Most of the accessories have standard parts and general parts.Spring Pin Connector

    Mainly by the needle shaft, spring, needle assembly, and then after the automatic riveting press after preloading to become a spring needle with elastic. Product surface will generally have a coating, the most common is gold-plated, also has nickel, tin and so on. Mainly in order to prevent products in the air oxidation, corrosion. Product life and coating thickness is also related.Spring Pin Connector

    The negative contact piece is the key part of the contact pair, which relies on the elastic structure to form a close contact with the positive contact parts when the elastic deformation occurs with the pin, and completes the connection. There are many kinds of holes in the structure, such as cylinder type (split groove, necking), tuning fork type, cantilever beam type (longitudinal grooving), Folding type (longitudinal grooving, 9 shape), box (square hole), and double curved wire spring jack.Spring Pin Connector

Previous:Cost Competition For Cable Assembly Next:Drive Performance Of Screw Connector